Injection moldable PE regranulate
IM-BASIC gray or black
Base polymer for injection molding applications
The quality of granules made from recycled polymers is subject to raw material-related variations. Next Polymers granules are carefully homogenized and exhibit constant quality during processing. The specified characteristic values are based on tests by a renowned institute for polymer technology and serve as a guide.
|Exam||Test method||Test conditions||Value||Unit|
|MFR (melt flow rate)||DIN EN ISO 1133-1||190°C / 2.16 kg||0,9 - 1,2||g/10 min|
|MFR (melt flow rate)||DIN EN ISO 1133-1||190°C / 5.00 kg||3,8 - 4,5||g/10 min|
|Density||DIN EN ISO 1183-1||Ethanol||0,940 - 0,960||g/cm|
|Tensile strength||DIN EN ISO 527-1/2||23°C / 5 mm/min||16 - 18||MPa|
|Elongation at break||DIN EN ISO 527-1/2||23°C / 5 mm/min||> 350||%|
|Tensile modulus of elasticity||DIN EN ISO 527-1/2||23°C / 5 mm/min||350 - 450||MPa|
|Charpy notched impact strength||DIN EN ISO 179-1/1eA||-30°C||6,0 - 7,0||kJ/m²|
|Processing speed||DIN EN ISO 294-4||parallel||1,1||%|
|Processing speed||DIN EN ISO 294-4||vertical||2,8||%|
IM-BASIC polymers are particularly suitable for blending with low-molecular HD-PE to increase product stiffness and improve flow behaviour.
Depending on the application, the use of additives such as odor absorbers, moisture absorbers and antioxidants may be necessary. We therefore recommend checking the application properties of our products before permanent use. The same applies to the process control during processing.
Due to these circumstances, we do not assume any warranty for the specified characteristic values, but ensure that these can serve as orientation for the serviceability test. Furthermore, we refer to our quality tests for quality monitoring in production and our factory test certificate. The storage of the granules should be well packed, dry and not over a period of more than 3 months. take place.
For further questions and information, please do not hesitate to contact our team.
BigBag on one-way pallet, weight approx. 1,160 kg (corresponds to approx. 23.2 to per truck load). Silo loading on request.