Extrusion blowable PE regranulate

EX-BASIC gray or black

Base polymer for film, pipe and sheet extrusion

The quality of granules made from recycled polymers is subject to raw material-related variations. Next Polymers granules are carefully homogenized and exhibit constant quality during processing. The specified characteristic values are based on tests by a renowned institute for polymer technology and serve as a guide.

ExamTest methodTest conditionsValueUnit
MFR (melt flow rate)DIN EN ISO 1133-1190°C / 2.16 kg0,8 - 1,0g/10 min
MFR (melt flow rate)DIN EN ISO 1133-1190°C / 5.00 kg2,5 - 3,5g/10 min
DensityDIN EN ISO 1183-1Ethanol0,930 - 0,960g/cm³
Tensile strengthDIN EN ISO 527-1/223°C / 5 mm/min16 - 18MPa
Elongation at breakDIN EN ISO 527-1/223°C / 5 mm/min> 400 %
Tensile modulus of elasticityDIN EN ISO 527-1/223°C / 5 mm/min250 - 350MPa
Charpy notched impact strengthDIN EN ISO 179-1/1eA-30°C8,0 - 10,0kJ/m²
Processing speedDIN EN ISO 294-4parallel1%
Processing speedDIN EN ISO 294-4vertical3,5%
When blowing thin films < 20 microns, speck formation cannot be avoided. These are typical for post-consumer raw materials, but do not affect the processability. suitability for processing. EX-BASIC polymers are particularly suitable for blending with HD-PE to increase product stiffness.
Depending on the application, the use of additives such as odor absorbers, moisture absorbers and antioxidants may be necessary. We therefore recommend checking the application properties of our products before permanent use. The same applies to the process control during processing.
Due to these circumstances, we do not assume any warranty for the specified characteristic values, but ensure that these can serve as orientation for the serviceability test. Furthermore, we refer to our quality tests for quality monitoring in production and our factory test certificate. The storage of the granules should be well packed, dry and not over a period of more than 3 months. take place.
For further questions and information, please do not hesitate to contact our team.


BigBag on one-way pallet, weight approx. 1,160 kg (corresponds to approx. 23.2 to per truck load). Silo loading on request.
fvh granules container